Wall panels are often used to decorate your walls without the need to paint them. Usually, this product is used to decorate the interior design of your building. There are several types of materials used in the manufacture of wall panels. One of them is the MDF panel. This panel has the advantage that many people choose it for building decoration.
Table of Contents
What is MDF Panels Like?
MDF panel are also often referred to as MDF plate. MDF plates are not only used for walls only. These plates are also used on floors. In panel installation, this is similar to installing plywood on the floor. It’s just that when installing these panels, the gaps between the panels are reduced compared to the gaps in the use of plywood.
This panel is already popular because it has similarities with other types of panels. One of the similarities is the finish or finish that is similar to other natural materials. In addition, this panel has a lower price range than other types. MDF is a translation of the word in English. The translation leads to an abbreviation, namely chipboard. MDF surface is quite smooth and even can be covered with veneer or paint. But mostly, these panels imitate natural wood surfaces.
MDF boards or plates are made using compacted wood chips, then go through a dry heating process, not baking. After that, continue to be given glue so that the wood chips adhere perfectly. These plates are in the form of sheets or panels so that it can easily be used for many purposes.
How to Install MDF Panel
There are several types of MDF panel. Likewise, how to install it because the size is different. For this reason, the way to install this panel consists of diagonal, horizontal, and vertical. Meanwhile, the installation step consists of two, namely, the frame method and using glue. The following will be explained in more detail.
Use Glue
The first step you have to do when you want to use this step is to pay attention to the surface. The surface of the object on which the MDF panels will be installed must be leveled with the sheet to which the glue will be applied.
You must remove defects on the surface before installing the plate. Among them are holes, cleaning old paint, removing all kinds of stains, and making the surface smooth (if there are protruding elements, remove them immediately by cutting them).
Apply glue to the sheet where the glue is, then attach it to the wall and press it. Tap the entire surface of the plate using a rubber mallet or a clenched fist. This panel can be a solution to decorate your room with a natural-like surface. Then you choose solid wood for example. Indeed it looks very natural and looks luxurious. But the price offered is also higher.
In contrast to MDF panels, this material combines the natural look of wood and the bonding of glue but has fairly good resistance. This material can withstand extreme weather and high humidity. In addition, this panel is easy to install and easy to look neater.
Frame Method
Unlike the glue method, the frame method does not require leveling the surface. You also don’t need to remove old paint. All you need to do is prime. Besides that, you also have to make cables and arrange markup. But checking the flatness of the wall needs to be done.
Checking the flatness of the walls needs to be done, and the goal is that bends can be found immediately. Then chipboard will be installed in the form of small pieces. Chipboard is useful for leveling the surface. If necessary, you can make thin insulation under crates or sheets of wood. Later, the plate will be inserted between the frame gaps with one.
Installation of panels can be done if the crate is ready. However, measure then cut first, according to the desired length. Plate installation starts from the corner. The panels must first be attached to the wall. This is intended so that the next element is installed in the previous groove.
Those are some points about MDF panels. Several advantages make this material popular and widely used. It’s good to use because of its resistance to weather and high humidity. Or used only for interior decoration. Both are superior points that make them prima donna. Apart from being cheap, this material is also easy to install and maintain.
Have you considered using it in your interior space? Or are you still considering more expensive materials? Believe me, MDF panels are not only cheaper, but their appearance is no less important than other natural materials. Quality can also be proven by your using it. So, what are you waiting for to start buying it right away and use it for the interior of your house and building?